List of EN standards
European Standards (abbreviated EN, from the German name Europäische Norm ("European standard"))[1][2] are technical standards drafted and maintained by CEN (European Committee for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute).
EN 1–999
[edit]- EN 1: Flued oil stoves with vaporizing burners
- EN 2: Classification of fires
- EN 3: Portable fire extinguishers
- EN 14: Dimensions of bed blankets
- EN 19: Industrial valves – Marking of metallic valves
- EN 20: Wood preservatives.
- EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water
- EN 40: Lighting columns
- EN 40-1: Part 1: Definitions and terms
- EN 40-2: Part 2: General requirements and dimensions
- EN 40-3-1: Part 3-1: Design and verification - Specification for characteristic loads
- EN 40-3-2: Part 3-2: Design and verification - Verification by testing
- EN 40-3-3: Part 3-3: Design and verification - Verification by calculation
- EN 40-4: Part 4: Requirements for reinforced and prestressed concrete lighting columns
- EN 40-5: Part 5: Requirements for steel lighting columns
- EN 40-6: Part 6: Requirements for aluminium lighting columns
- EN 40-7: Part 7: Requirements for fibre reinforced polymer composite lighting columns
- EN 54: Fire detection and fire alarm systems
- EN 71: Safety of toys
- EN 81: Safety of lifts and escalators
- EN 115: Safety of escalators & Moving walks
- EN 131: Ladders
- EN 136: Respiratory protective devices – Full-face masks – Requirements, testing and marking[3]
- EN 137: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking[3]
- EN 140: Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking[3]
- EN 142: Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking[3]
- EN 143: Respiratory protective devices – Particle filters – Requirements, testing, marking[3]
- EN 144: Respiratory protective devices – Gas cylinder valves[3]
- EN 145 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking[3]
- EN 148 Respiratory protective devices – Threads for facepieces[3]
- EN 149: Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking[3]
- EN 166: Personal eye-protection – Specifications[3]
- EN 169: Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use[3]
- EN 170: Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use[3]
- EN 172: Personal eye protection – Sunglare filters for industrial use[3]
- EN 174: Personal eye-protection – Ski goggles for downhill skiing[3]
- EN 175: Personal protection – Equipment for eye and face protection during welding and allied processes[3]
- EN 196: Methods for testing cement (10 parts)
- EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements
- EN 197-2: Cement – Part 2 : Conformity evaluation
- EN 206-1: Concrete – Part 1: Specification, performance, production and conformity
- EN 207: Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors)[3]
- EN 208: Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)[3]
- EN 228: Specifications for automotive petrol
- EN 250: Respiratory equipment – Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking[3]
- EN 280: Mobile elevating work platforms. Design calculations, Stability criteria, Construction, Safety Examinations and tests
- EN 286: Simple unfired pressure vessels designed to contain air or nitrogen
- Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
- Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
- EN 287: Qualification test of welders — Fusion welding
- Part 1: Steels
- EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs
- EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
- EN 301 549: European standard for digital accessibility
- EN 336: Structural timber — Sizes, permitted deviations
- EN 338: Structural timber — Strength classes
- EN 341: Personal protective equipment against falls from a height. Descender devices
- EN 342: Protective clothing – Ensembles and garments for protection against cold[3]
- EN 343: Protective clothing – Protection against rain[3]
- EN 352: Hearing protectors – General requirements[3]
- EN 352: Hearing protectors – Safety requirements[3]
- EN 352-4: Part 4: Level-dependent earmuffs
- EN 352-5: Part 5: Active noise reduction earmuffs
- EN 352-6: Part 6: Earmuffs with safety-related audio input
- EN 352-7: Part 7: Level-dependent earplugs
- EN 352-8: Part 8: Entertainment audio earmuffs
- EN 352-9: Part 9: Earplugs with safety-related audio input
- EN 352-10: Part 10: Entertainment audio earplugs
- EN 353-1: Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line[3]
- EN 353-2: Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line[3]
- EN 354: Personal fall protection equipment – Lanyards[3]
- EN 355: Personal protective equipment against falls from a height – Energy absorbers[3]
- EN 358: Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint[3]
- EN 360: Personal fall protection equipment – Retractable type fall arresters[3]
- EN 361: Personal protective equipment against falls from a height – Full body harnesses[3]
- EN 362: Personal protective equipment against falls from a height – Connectors[3]
- EN 363: Personal protective equipment against falls from a height – Fall arrest systems
- EN 365: Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging[3]
- EN ISO 374: Protective gloves against dangerous chemicals and micro-organisms[3]
- EN ISO 374-1: Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
- EN ISO 374-5: Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
- EN 379: Personal eye-protection – Automatic welding filters[3]
- EN 381: Protective clothing for users of hand-held chain saws[3]
- EN 386: Glued laminated timber - Performance requirements and minimum production requirements
- EN 388: Protective gloves against mechanical risks[3]
- EN 390: Glued laminated timber. Sizes. Permissible deviations
- EN 391: Glued laminated timber - Delamination tests of glue lines
- EN 392: Glued laminated timber - Shear test of glue lines
- EN 397: Industrial safety helmets[3]
- EN 402: Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking[3]
- EN 403: Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking[3]
- EN 404: Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly[3]
- EN 405: Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking[3]
- EN 407: Protective gloves against thermal risks (heat and/or fire)[3]
- EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties
- EN 417: Non-refillable metallic cartridges for liquefied petroleum gases
- EN 420: Protective gloves – General requirements and test methods[3]
- EN 421: Protective gloves against ionizing radiation and radioactive contamination[3]
- EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins.
- EN 440: "Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel - Classification" (1994)
- EN 443: Helmets for fire fighting in buildings and other structures[3]
- EN 450: Fly ash for concrete - Definitions, requirements and quality control
- EN 469: Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities[3]
- EN 474: Earth-moving Machinery. Safety. General Requirements
- EN 510: Specification for protective clothing for use where there is a risk of entanglement with moving parts[3]
- EN 511: Protective gloves against cold[3]
- EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)
- EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1)
- EN 564: Mountaineering equipment – Accessory cords – Safety requirements and test methods[3]
- EN 565: Mountaineering equipment – Tape – Safety requirements and test methods[3]
- EN 566: Mountaineering equipment – Slings – Safety requirements and test methods[3]
- EN 567: Mountaineering equipment – Rope clamps – Safety requirements and test methods[3]
- EN 568: Mountaineering equipment – Ice anchors – Safety requirements and test methods[3]
- EN 569: Mountaineering equipment – Pitons – Safety requirements and test methods[3]
- EN 590: Specification for automotive diesel
- EN 631: Containers for foodstuffs
- EN 659: Protective gloves for firefighters[3]
- EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems
- EN 716: Children's cots and folding cots for domestic use
- EN 795: Personal fall protection equipment – Anchor devices[3]
- EN 805: Water supply. Requirements for systems and components outside buildings
- EN 812: Industrial bump caps[3]
- EN 813: Personal fall protection equipment – Sit harnesses[3]
- EN 837: Pressure connections
- EN 840: Mobile waste containers.
- EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
- EN 892: Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods[3]
- EN 893: Mountaineering equipment – Crampons – Safety requirements and test methods[3]
- EN 926: Paragliding equipment - Paragliders
- EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method
- EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements
- EN 943: Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols[3]
- EN 958: Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods[3]
- EN 966: Helmets for airborne sports[3]
- EN 980: Symbols for use in the labeling of medical devices
EN 1000–1989
[edit]- EN 1010-1: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements
- EN 1010-2: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery
- EN 1010-3: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
- EN 1010-4: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines
- EN 1010-5: Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated board
- EN 1069: Water slides of 2 m height and more
- EN 1073-1: Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract[3]
- EN 1073-2: Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination[3]
- EN 1077: Helmets for alpine skiers and snowboarders[3]
- EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates[3]
- EN 1080: Impact protection helmets for young children[3]
- EN 1082: Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives[3]
- EN 1090: Execution of steel structures and aluminium structures (3 parts)
- EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
- EN 1146: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking[3]
- EN 1149-5: Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements[3]
- EN 1150: Protective clothing – Visibility clothing for non-professional use – Test methods and requirements[3]
- EN 1168: Precast concrete products - Hollow core slabs
- EN 1176-1: Playground equipment. General safety requirements and test methods
- EN 1177: Impact absorbing playground surfacing. Safety requirements and test methods
- EN 1325:2014: Value Management. Vocabulary. Terms and definitions
- EN 1337: Structural bearings
- EN 1384: Helmets for equestrian activities[3]
- EN 1385: Helmets for canoeing and white water sports[3]
- EN 1399: Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes
- EN 1401: Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)
- EN 1466: Child use and care articles - Carry cots and stands - Safety requirements and test methods
- EN 1486: Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting[3]
- EN 1496: Personal fall protection equipment – Rescue lifting devices
- EN 1497: Personal fall protection equipment – Rescue harnesses[3]
- EN 1679: Reciprocating internal combustion engines: Compression ignition engines
- EN 1731: Personal eye protection – Mesh eye and face protectors[3]
- EN 1809: Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.
- EN 1815: Resilient and textile floor coverings. Assessment of static electrical propensity
- EN 1827: Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking[3]
- EN 1846: Firefighting and rescue service vehicles
- EN 1888-1: Child use and care articles - Wheeled child conveyances (Part 1: Pushchairs and prams—Up to 15 kg)
- EN 1888-2: Child use and care articles - Wheeled child conveyances (Part 2: Pushchairs for children above 15 kg up to 22 kg)
- EN 1891: Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes[3]
- EN 1938: Personal eye protection – Goggles for motorcycle and moped users[3]
- EN 1972: Diving equipment - Snorkels - Requirements and test methods
EN 1990–1999 (Eurocodes)
[edit]- EN 1990: (Eurocode 0) Basis of structural design
- EN 1991: (Eurocode 1) Actions on structures
- EN 1992: (Eurocode 2) Design of concrete structures
- EN 1993: (Eurocode 3) Design of steel structures
- EN 1994: (Eurocode 4) Design of composite steel and concrete structures
- EN 1995: (Eurocode 5) Design of timber structures
- EN 1996: (Eurocode 6) Design of masonry structures
- EN 1997: (Eurocode 7) Geotechnical design
- EN 1998: (Eurocode 8) Design of structures for earthquake resistance
- EN 1999: (Eurocode 9) Design of aluminium structures
EN 10000–10999
[edit]This range includes almost exclusively CEN Standards related to iron and steel.
- EN 10002: Metallic Materials - Tensile Testing
- EN 10002-1: Method of Test at Ambient Temperature
- EN 10002-5: Method of testing at elevated temperatures
- EN 10024: Hot rolled taper flange I sections. Tolerances on shape and dimensions
- EN 10025: Hot rolled products of structural steels
- EN 10025-1: Part 1: General technical delivery conditions
- EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels
- EN 10025-3: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
- EN 10025-4: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
- EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- EN 10025-6:Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
- EN 10027: Designation systems for steel.[5]
- EN 10088-1 Stainless steels - Part 1: List of stainless steels
- EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- EN 10088-3 Stainless steels - Part 3: Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes;
- EN 10149: Hot rolled flat products made of high yield strength steels for cold forming.
- EN 10149-1: General technical delivery conditions
- EN 10149-2: Technical delivery conditions for thermomechanically rolled steels
- EN 10149-3: Technical delivery conditions for normalized or normalized rolled steels
- EN 10204: Metallic products - Types of inspection documents
- EN 10216: Seamless steel tubes for pressure purposes
- EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10216-2: Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties
- EN 10216-3: Part 3: Alloy fine grain steel tubes
- EN 10216-4: Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- EN 10216-5: Part 5: Stainless steel tubes
- EN 10217: Welded steel tubes for pressure purposes
- EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- EN 10217-3: Part 3: Alloy fine grain steel tubes
- EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
- EN 10217-7: Part 7: Welded stainless steel tubes for pressure purposes at low and elevated temperature environment
- EN 10220: Seamless and welded steel tubes — Dimensions and masses per unit length
- EN 10240: Internal and/or external protective coating for steel tubes - specification for hot dip galvanized coatings applied in automatic plants
- EN 10270-1: Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
- EN 10270-2: Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
- EN 10305: Steel tubes for precision applications — Technical delivery conditions
- Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 12080, Railway applications — Axleboxes — Rolling bearings
- EN 10357: Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
- EN 10365: Hot rolled steel channels, I and H sections. Dimensions and masses
- EN ISO 10819: Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)[3]
- EN ISO 10862: Small craft – Quick release system for trapeze harness (ISO 10862:2009)[3]
EN 11000–19999
[edit]- EN ISO 11393: Protective clothing for users of hand-held chainsaws[3]
- EN ISO 11393-2: Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)
- EN ISO 11393-4: Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
- EN ISO 11393-5: Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)
- EN ISO 11393-6: Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018)
- EN 12021: Respiratory equipment – Compressed gases for breathing apparatus[3]
- EN 12083: Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking[3]
- EN 12102: Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
- EN 12103: Resilient floor coverings - Agglomerated cork underlays - specification
- EN 12104: Resilient floor coverings - Cork floor tiles - Specification
- EN 12105: Resilient floor coverings - Determination of moisture content of agglomerated composition cork
- EN 12199: Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
- EN 12221: Changing units for domestic use
- EN 12246: Quality classification of timber used in pallets and packaging
- EN 12255: Wastewater treatment plants
- EN 12255-1: Part 1: General construction principles
- EN 12255-2: Part 2: Performance requirements of raw wastewater pumping installations
- EN 12255-3: Part 3: Preliminary treatment
- EN 12255-4: Part 4: Primary settlement
- EN 12255-5: Part 5: Lagooning processes
- EN 12255-6: Part 6: Activated sludge process
- EN 12255-7: Part 7: Biological fixed-film reactors
- EN 12255-8: Part 8: Sludge treatment and storage
- EN 12255-9: Part 9: Odour control and ventilation
- EN 12255-10: Part 10: Safety principles
- EN 12255-11: Part 11: General data required
- EN 12255-12: Part 12: Control and automation
- EN 12255-13: Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation
- EN 12255-14: Part 14: Disinfection
- EN 12255-15: Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
- EN 12255-16: Part 16: Physical (mechanical) filtration
- EN 12270: Mountaineering equipment – Chocks – Safety requirements and test methods[3]
- EN 12275: Mountaineering equipment – Connectors – Safety requirements and test methods[3]
- EN 12276: Mountaineering equipment – Frictional anchors – Safety requirements and test methods[3]
- EN 12277: Mountaineering equipment – Harnesses – Safety requirements and test methods[3]
- EN 12278: Montaineering equipment – Pulleys – Safety requirements and test methods[3]
- EN 12281: Printing and business paper. Requirements for copy paper.
- EN ISO 12312: Eye and face protection – Sunglasses and related eyewear[3]
- EN ISO 12312-1: Part 1: Sunglasses for general use (ISO 12312-1:2013)
- EN ISO 12312-2: Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
- EN 12345: Welding. Multilingual terms for welded joints with illustrations
- EN ISO 12401: Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009)[3]
- EN ISO 12402: Personal flotation devices[3]
- EN ISO 12402-2: Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020)
- EN ISO 12402-3: Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020)
- EN ISO 12402-4: Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020)
- EN ISO 12402-5: Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020)
- EN ISO 12402-6: Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020)
- EN ISO 12402-8: Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020)
- EN 12477: Protective gloves for welders[3]
- EN 12492: Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods[3]
- EN 12566: Small wastewater treatment systems for up to 50 PT
- EN 12566-1: Part 1: Prefabricated septic tanks
- EN 12566-2: Part 2: Soil infiltration systems
- EN 12566-3: Part 3: Packaged and/or site assembled domestic wastewater treatment plants
- EN 12566-4: Part 4: Septic tanks assembled in situ from prefabricated kits
- EN 12566-5: Part 5: Pretreated Effluent Filtration systems
- EN 12566-6: Part 6: Prefabricated treatment units for septic tank effluent
- EN 12566-7: Part 7: Prefabricated tertiary treatment units
- EN 12572: Artificial climbing structures
- EN 12600: Classification of Resistance of Glazing to Impact
- EN 12663: Railway applications - Structural requirements of railway vehicle bodies
- Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
- Part 2: Freight wagons
- EN 12797: Brazing – Destructive tests of brazed joints
- EN 12799: Brazing – Non-destructive examination brazed joints
- EN 12810: Facade scaffolds made of prefabricated parts
- EN 12811: Temporary works equipment
- EN 12841: Personal fall protection equipment – Rope access systems – Rope adjustment devices[3]
- EN 12845 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance [6]
- EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores
- EN 12896: Public Transport Reference Data Model
- EN 12941: Respiratory protective devices – Powered filtering devices incorporating a loose fitting respiratory interface – Requirements, testing, marking[3]
- EN 12942: Respiratory protective devices – Powered filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking[3]
- EN 12952: Water-Tube Boilers and Auxiliary Installations
- EN 12973: Value Management
- EN 12975-1: Thermal solar systems and components - Solar collectors
- EN 13000: Cranes - Mobile Cranes
- EN 13034: Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)[3]
- EN 13061: Protective clothing – Shin guards for association football players – Requirements and test methods[3]
- EN 13089: Mountaineering equipment – Ice-tools – Safety requirements and test methods[3]
- EN 13103: Railway applications — Wheelsets and bogies — Non-powered axles — Design method
- EN 13104: Railway applications — Wheelsets and bogies — Powered axles — Design method
- EN 13133: "Brazing - Brazer approval" (2000)
- EN 13138-1: Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn[3]
- EN 13145: Railway applications - Track - Wood sleepers and bearers
- EN 13146: Railway applications - Track - Test methods for fastening systems
- EN 13146-1: Part 1: Determination of longitudinal rail restraint
- EN 13146-2: Part 2: Determination of torsional resistance
- EN 13146-3: Part 3: Determination of attenuation of impact loads
- EN 13146-4: Part 4: Effect of repeated loading
- EN 13146-5: Part 5: Determination of electrical resistance
- EN 13146-6: Part 6: Effect of severe environmental conditions
- EN 13146-7: Part 7: Determination of clamping force
- EN 13146-8: Part 8: In service testing
- EN 13146-9: Part 9: Determination of stiffness
- EN 13158: Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods[3]
- EN 13162: Thermal insulation products for buildings - Factory made mineral wool (MW) products
- EN 13178: Personal eye-protection – Eye protectors for snowmobile users[3]
- EN 13204: Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements[7]
- EN 13231: Railway applications - Track - Acceptance of works
- EN 13231-1: Part 1: Works on ballasted track - Plain line, switches and crossings
- EN 13231-2: Part 2: Acceptance of reprofiling rails in plain line, switches, crossings, and expansion devices
- EN 13231-3: withdrawn, replaced by EN 13231-2
- EN 13231-4: withdrawn, replaced by EN 13231-2
- EN 13231-5: Part 5: Procedures for rail reprofiling in plain line, switches, crossings, and expansion devices
- EN 13260: Railway applications — Wheelsets and bogies — Wheelsets — Product requirements
- EN 13261: Railway applications — Wheelsets and bogies — Axles — Product requirements
- EN 13262: Railway applications — Wheelsets and bogies — Wheels — Product requirements
- EN 13277: Protective equipment for martial arts[3]
- EN 13277-1: Part 1: General requirements and test methods
- EN 13277-2: Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
- EN 13277-3: Part 3: Additional requirements and test methods for trunk protectors
- EN 13277-4: Part 4: Additional requirements and test methods for head protectors
- EN 13277-5: Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
- EN 13277-6: Part 6: Additional requirements and test methods for breast protectors for females
- EN 13277-7: Part 7: Additional requirements and test methods for hand and foot protectors
- EN 13277-8: Part 8: Additional requirements and test methods for karate face protectors
- EN 13300: quality and classification of (interior) wall paint
- EN 13309: Construction machinery - Electromagnetic compatibility of machines with internal power supply
- EN 13319: Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.
- EN 13356: Visibility accessories for non-professional use – Test methods and requirements[3]
- EN 13402: Size designation of clothes
- EN 13432: Compostable and biodegradable packaging
- EN 13445: Unfired pressure vessels
- EN 13480: Metallic industrial piping
- EN 13484: Helmets for users of luges[3]
- EN 13501: Fire classification of construction products and building elements
- EN 13537: Temperature ratings for sleeping bags
- EN 13546: Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods[3]
- EN 13567: Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods[3]
- EN 13594: Protective gloves for motorcycle riders – Requirements and test methods[3]
- EN 13595: Protective clothing for professional motorcycle riders – Jackets, trousers and one piece or divided suits[3]
- EN 13595-1: Part 1: General requirements[3]
- EN 13595-2: Part 2: Test method for determination of impact abrasion resistance
- EN 13595-3: Part 3: Test method for determination of burst strength[3]
- EN 13595-4: Part 4: Test methods for the determination of impact cut resistance
- EN 13612: Performance evaluation of in-vitro diagnostic devices
- EN 13634: Protective footwear for motorcycle riders – Requirements and test methods[3]
- EN 13640: Stability testing of in vitro diagnostic reagents
- EN ISO 13688: Protective clothing – General requirements (ISO 13688:2013)[3]
- EN 13749 Railway applications — Wheelsets and bogies — Method of specifying the structural requirements of bogie frames
- EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)
- EN 13781: Protective helmets for drivers and passengers of snowmobiles and bobsleighs[3]
- EN 13794: Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking[3]
- EN 13803: Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider
- EN 13832: Footwear protecting against chemicals[3]
- EN 13832-2: Part 2: Requirements for limited contact with chemicals
- EN 13832-3: Part 3: Requirements for prolonged contact with chemicals
- EN 13940:2016: System of concepts to support continuity of care
- EN 13949: Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking[3]
- EN 13979: Railway applications — Wheelsets and bogies — Monobloc wheels — Technical approval procedure
- Part 1: Forged and rolled wheels
- EN ISO 13982: Protective clothing for use against solid particulates
- EN ISO 13982-1: Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)[3]
- EN ISO 13998: Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)[3]
- EN 14021: Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods[3]
- EN 14033: Railway applications — Track — Railbound construction and maintenance machines
- Part 1: Technical requirements for running
- Part 2: Technical requirements for travelling and working
- Part 3: General safety requirements
- EN 14052: High performance industrial helmets[3]
- EN 14058: Protective clothing – Garments for protection against cool environments[3]
- EN 14067: Railway applications — Aerodynamics
- Part 1: Symbols and units
- Part 3: Aerodynamics in tunnels
- Part 4: Requirements and test procedures for aerodynamics on open track
- Part 5: Requirements and test procedures for aerodynamics in tunnels
- Part 6: Requirements and test procedures for cross wind assessment
- EN 14081: Timber structures - Strength graded structural timber with rectangular cross section
- Part 1: General requirements
- Part 2: Machine grading - additional requirements for initial type testing.
- Part 3: Machine grading - additional requirements for factory production control.
- Part 4: Machine grading - grading machine settings for machine controlled systems.
- EN 14120: Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods[3]
- EN 14126: Protective clothing – Performance requirements and tests methods for protective clothing against infective agents[3]
- EN 14143: Respiratory equipment – Self-contained re-breathing diving apparatus[3]
- EN 14214: The pure biodiesel standard
- EN 14225: Diving suits[3]
- EN 14225-1: Part 1: Wet suits – Requirements and test methods
- EN 14225-2: Part 2: Dry suits – Requirements and test methods
- EN 14225-3: Part 3: Actively heated or cooled suit systems and components – Requirements and test methods
- EN 14328: Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods[3]
- EN 14363: Railway applications — Testing and Simulation for the acceptance of running characteristics of railway vehicles — Running Behaviour and stationary tests
- EN 14387: Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking[3]
- EN 14435: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking[3]
- EN 14450: Secure storage units — Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
- EN 14458: Personal eye-equipment – High performance visors intended only for use with protective helmets[3]
- EN ISO 14460: Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999)[3]
- EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling
- EN 14529: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only[3]
- EN 14531: Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking
- Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
- Part 2: Step by step calculations for train sets or single vehicles
- EN 14535: Railway applications — Brake discs for railway rolling stock
- Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
- Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
- EN 14593-1: Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking[3]
- EN 14594: Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking[3]
- EN 14601: Railway applications — Straight and angled end cocks for brake pipe and main reservoir pipe
- EN 14605: Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])[3]
- EN 14683: Medical face masks — Requirements and test method[8]
- EN ISO 14877: Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)[3]
- EN 14904: Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
- EN 14988: Children's High chairs
- Part 1: Safety requirements
- Part 2: Test methods
- EN ISO 15027: Immersion suits[3]
- EN ISO 15027-1: Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
- EN ISO 15027-2: Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
- EN 15090: Footwear for firefighters[3]
- EN 15151-1: Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods[3]
- EN 15152: Railway applications — Front windscreens for train cabs
- EN 15153: Railway applications — External visible and audible warning devices
- Part 1: Head, marker and tail lamps
- Part 2: Warning horns
- EN 15179: Railway applications — Braking — Requirements for the brake system of coaches
- EN 15220: Railway applications — Brake indicators
- EN 15227: Railway applications — Crashworthiness requirements for railway vehicle bodies
- EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings- addressing indoor air quality, thermal environment, lighting and acoustics
- EN 15273: Railway applications - Gauges
- Part 1: General - Common rules for infrastructure and rolling stock
- Part 2: Rolling stock gauge
- Part 3: Structure gauges
- EN 15313: Railway applications — In-service wheelset operation requirements — In-service and off-vehicle wheelset maintenance
- EN 15329: Railway applications — Braking — Brake block holder and brake shoe key for railway vehicles
- EN 15333: Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus[3]
- EN 15333-1: Part 1: Demand apparatus
- EN 15333-2: Part 2: Free flow apparatus
- EN 15355: Railway applications — Braking — Distributor valves and distributor-isolating devices
- EN 15427 Railway applications - Wheel/Rail friction management
- Part 1-1: Equipment and Application – Flange lubrication
- Part 1-2: Equipment and Application – Top of Rail materials
- Part 1-3: Equipment and Application – Adhesion materials
- Part 2-1: Properties and Characteristics – Flange lubricants
- Part 2-2: Properties and Characteristics – Top of Rail materials
- Part 2-3: Properties and Characteristics – Adhesion materials
- EN 15437: Railway applications — Axlebox condition monitoring — Interface and design requirements
- Part 1: Track side equipment and rolling stock axlebox
- EN 15528: Railway applications — Line categories for managing the interface between load limits of vehicles and infrastructure
- EN 15531: Service Interface for Real Time Information
- EN 15551: Railway applications — Railway rolling stock — Buffers
- EN 15566: Railway applications — Railway rolling stock — Draw gear and screw coupling
- EN 15595: Railway applications - Braking - Wheel slide protection
- EN 15610: Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
- EN 15611: Railway applications — Braking — Relay valves
- EN 15612: Railway applications — Braking — Brake pipe accelerator valve
- EN 15613: Knee and elbow protectors for indoor sports – Safety requirements and test methods[3]
- EN 15624: Railway applications — Braking — Empty-loaded changeover devices
- EN 15625: Railway applications — Braking — Automatic variable load sensing devices
- EN 15663: Railway applications — Definition of vehicle reference masses
- EN 15714: Industrial Valves - Actuators
- EN 15744: Film identification — Minimum set of metadata for cinematographic works
- EN 15804: Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products
- EN 15806: Railway applications — Braking — Static brake testing
- EN 15807: Railway applications — Pneumatic half couplings
- EN 15827: Railway applications — Requirements for bogies and running gears
- EN 15838: Customer Contact Centres - Requirements for service provision
- EN 15839: Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Testing of running safety under longitudinal compressive forces
- EN 15877: Railway applications — Marking on railway vehicles
- Part 1: Freight wagons
- Part 2: External markings on coaches, motive power units, locomotives and on track machines
- EN 15883: Washer-disinfectors
- EN 15907: Film identification — Enhancing interoperability of metadata - Element sets and structures
- EN 16001: Energy management systems; withdrawn, replaced by ISO 50001
- EN 16027: Protective clothing – Gloves with protective effect for association football goal keepers[3]
- EN 16034: Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
- EN 16114: Management consultancy services
- EN 16207: Railway applications — Braking — Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
- EN 16228: Drilling and foundation equipment – Safety
- EN 16228-1: Common requirements
- EN 16228-2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
- EN 16228-3: Horizontal directional drilling equipment (HDD)
- EN 16228-4: Foundation equipment
- EN 16228-5: Diaphragm walling equipment
- EN 16228-6: Jetting, grouting and injection equipment
- EN 16228-7: Interchangeable auxiliary equipment
- EN 16247: Energy audits
- EN ISO 16321: Eye and face protection for occupational use[3]
- EN ISO 16321-1: Part 1: General requirements (ISO 16321-1:2021)
- EN ISO 16321-2: Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
- EN ISO 16321-3: Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
- EN 16350: Protective gloves – Electrostatic properties[3]
- EN 16404: Railway applications — Re-railing and recovery requirements for railway vehicles
- EN 16473: Firefighters helmets – Helmets for technical rescue[3]
- EN 16716: Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods[3]
- EN 16725: Railway applications — Track — Restoration and repair of manganese crossings
- EN 16729: Railway applications – Infrastructure – Non-destructive testing on rails in track
- EN 16729-1: Part 1: Requirements for ultrasonic inspection and evaluation principles
- EN 16729-2: Part 2: Eddy current testing of rails in track
- EN 16729-3: Part 3: Requirements for identifying internal and surface rail defects
- EN 16729-4: Part 4: Qualification of personnel for non-destructive testing on rails
- EN 16729-5: Part 5: Non-destructive testing on welds in track
- EN 16804: Diving equipment — Diving open heel fins — Requirements and test methods
- EN 16805: Diving equipment — Diving mask — Requirements and test methods
- EN 16931-1: Electronic Invoicing - Semantic data model of the core elements of an electronic invoice
- EN 17092: Protective garments for motorcycle riders[3]
- EN 17092-2: Part 2: Class AAA garments – Requirements
- EN 17092-3: Part 3: Class AA garments – Requirements
- EN 17092-4: Part 4: Class A garments – Requirements
- EN 17092-5: Part 5: Class B garments – Requirements
- EN 17092-6: Part 6: Class C garments – Requirements
- EN 17109: Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods[3]
- EN 17161: Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users
- EN ISO 17249: Safety footwear with resistance to chain saw cutting (ISO 17249:2013)[3]
- EN 17282: Railway applications — Infrastructure —Under ballast mats
- EN 17343: Railway applications — General terms and definitions
- EN 17353: Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements[3]
- EN 17397: Railway applications — Rail defects
- EN 17397-1: Part 1: Rail defect management
- EN 17495: Railway Applications — Acoustics — Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies
- EN 17520: Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods[3]
- EN 17682: Railway applications — Infrastructure — Resilient element for floating slab system
- EN 17927: Security Evaluation Standard for IoT Platforms (SESIP)
- EN ISO 18527: Eye and face protection for sports use[3]
- EN ISO 18527-1: Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
- EN ISO 18527-2: Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)
EN 20000–49999
[edit]- EN ISO 20320: Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020)[3]
- EN ISO 20345: Personal protective equipment – Safety footwear (ISO 20345:2021)[3]
- EN ISO 20346: Personal protective equipment – Protective footwear (ISO 20346:2021)[3]
- EN ISO 20347: Personal protective equipment – Occupational footwear (ISO 20347:2021)[3]
- EN ISO 20349: Personal protective equipment – Footwear protecting against risks in foundries and welding[3]
- EN ISO 20349-1: Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)
- EN ISO 20349-2: Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)
- EN ISO 20471: High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)[3]
- EN ISO 27065: Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)[3]
- EN 28601: Data elements and interchange formats; information interchange; representation of dates and times
- EN 45011: General requirements for bodies operating product certification systems, replaced in 2012 by ISO/IEC 17065 Conformity assessment: Requirements for bodies certifying products, processes and services.[9]
- EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
- EN 45545: Railway applications. Fire protection on railway vehicles.
- EN 45545-1: Railway applications. Fire protection on railway vehicles. General
- EN 45545-2: Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components
- EN 45545-3: Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
- EN 45545-4: Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design
- EN 45545-5: Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
- EN 45545-6: Railway applications. Fire protection on railway vehicles. Fire control and management systems
- EN 45545-7: Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
- EN 45554: General methods for the assessment of the ability to repair, reuse and upgrade energy-related products
EN 50000–59999 (CENELEC specific, non-IEC electrical standards)
[edit]- EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)
- EN 50075: Europlug
- EN 50090: Home and Building Electronic Systems (KNX/EIB)
- EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts
- EN 50119: Railway applications - Fixed installations: Electric traction overhead contact lines for railways
- EN 50121: Railway applications - Electromagnetic compatibility
- EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
- EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside world
- EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle
- EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2 : rolling stock - Apparatus
- EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signaling and telecommunications apparatus
- EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
- EN 50122: Railway applications - Fixed installations
- EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
- EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of Stray currents caused by d.c. traction systems
- EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
- EN 50123: Railway applications - Fixed installations - D.C. switchgear
- EN 50124: Railway applications - Insulation coordination
- EN 50125-1: Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
- EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
- EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signaling and telecommunications
- EN 50126: Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
- EN 50128: Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
- EN 50129: Railway applications - Communication, signalling and processing systems – Safety related electronic systems for signalling
- EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
- EN 50131: Alarm systems - Intrusion and hold-up systems
- EN 50136: Alarm systems - Alarm transmission systems
- EN 50153: Railway applications - Rolling stock - Protective provisions relating to electrical hazards
- EN 50155: Railway applications - Electronic equipment used on rolling stock
- EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)
- EN 50159: Railway applications - Communication, signaling and processing systems - Safety-related communication in transmission systems
- EN 50163: Railway applications - Supply voltages of traction systems
- EN 50178: Electronic equipment for use in power installations
- EN 50207: Railway applications - Electronic power converters for rolling stock
- EN 50262: Metric cable glands
- EN 50267: Corrosive Gases
- EN 50272-1: Standards for Safety requirements for secondary batteries and battery installations - Part 1 General safety information
- EN 50272-2: Standards for Safety requirements for secondary batteries and battery installations - Part 2 Stationary batteries
- EN 50522: Earthing of power installations exceeding 1 kV a.c.
- EN 50308: Wind Turbines - Protective Measures - Requirements for design, operation and maintenance
- EN 50321-1: Live working – Footwear for electrical protection – Insulating footwear and overboots[3]
- EN 50325: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
- EN 50365: Live Working – Electrically insulating helmets for use on low and medium voltage installations[3]
- EN 50412: Power line communication apparatus and systems used in low-voltage installations in the frequency range 1.6 MHz to 30 MHz
- EN 50436: Alcohol interlocks
- EN 50465: Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
- EN 50470-3: Electricity metering equipment - Part 3: Particular requirements - Static meters for AC active energy (class indexes A, B and C)
- EN 50470-4: Electricity metering equipment - Part 4: Particular requirements - Static meters for DC active energy (class indexes A, B and C)
- EN 50525: Low voltage energy cables; a merger of HD 21 and HD 22.
- EN 50571: Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
- EN 50562: Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems
- EN 50581: documentation for the assessment of electrical and electronic products with respect to the RoHS
- EN 50600: Information technology - Data centre facilities and infrastructures
- EN 50617-1: Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
- EN 50617-2: Railway Applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 2: Axle counters
- EN 50632: Electric motor-operated tools - Dust measurement Procedure
- EN 50657: Railways Applications - Rolling stock applications - Software on Board Rolling Stock
- EN 50716: Cross-functional Software Standard for Railways
- EN 55011: Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- EN 55014: Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus
- EN 55022: Information technology equipment. Radio disturbance characteristics.
- EN 55024: Information technology equipment. Immunity characteristics.
- EN 55032: Electromagnetic Compatibility of Multimedia Equipment. Emission requirements.
- EN 55035: Electromagnetic Compatibility of Multimedia Equipment. Immunity requirements.
EN 60000-69999 (CENELEC editions of IEC standards)
[edit]- EN 60065: Audio, Video and similar electronics apparatus - Safety requirements.
- EN 60077: Railway applications - Electric equipment for rolling stock
- EN 60950-1: Information technology equipment - Safety - Part1: General requirements
- EN 60950-21: Information technology equipment - Safety - Part21: Remote power feeding
- EN 60950-22: Information technology equipment - Safety - Part22: Equipment installed outdoors
- EN 60950-23: Information technology equipment - Safety - Part23: Large data storage equipment
- EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
- EN 61000-1-3: Electromagnetic compatibility (EMC). General. The effects of high-altitude EMP (HEMP) on civil equipment and systems
- EN 61000-1-4: Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
- EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects on civil systems
- EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
- EN 61000-2-2: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
- EN 61000-2-4: Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
- EN 61000-2-9: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication
- EN 61000-2-10: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance
- EN 61000-2-12: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems
- EN 61000-3-2: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
- EN 61000-3-3: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
- EN 61000-3-11: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
- EN 61000-3-12: Electromagnetic compatibility (EMC). Limits.
- EN 61000-4-1: Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
- EN 61000-4-2: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
- EN 61000-4-3: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
- EN 61000-4-4: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test
- EN 61000-4-5: Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
- EN 61000-4-6: Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
- EN 61000-4-7: Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
- EN 61000-4-8: Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication
- EN 61000-4-11: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
- EN 61000-4-12: Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication
- EN 61000-4-13: Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests
- EN 61000-4-14: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
- EN 61000-4-15: Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication
- EN 61000-4-16: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
- EN 61000-4-17: Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
- EN 61000-4-18: Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
- EN 61000-4-19: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c. power ports
- EN 61000-4-20: Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
- EN 61000-4-21: Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
- EN 61000-4-22: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
- EN 61000-4-23: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
- EN 61000-4-24: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
- EN 61000-4-25: Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems
- EN 61000-4-27: Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
- EN 61000-4-28: Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
- EN 61000-4-29: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests. Basic EMC Publication.
- EN 61000-4-30: Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Power quality measurement methods
- EN 61000-4-34: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
- IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. General considerations. Basic EMC publication
- EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
- EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code). Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
- EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
- EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
- EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
- EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
- EN 61482-2: Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements[3]
- EN 62061 /IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
- EN 62353:2014 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
Moreover, there are a lot of ISO and IEC standards that were accepted as "European Standard" (headlined as EN ISO xxxxx) and are valid in the European Economic Region.
See also
[edit]- Institute for Reference Materials and Measurements (IRMM)
- List of ASTM International standards (D5001-6000)
- List of ASTM International standards (D6001-7000)
- List of DIN standards
- List of ISO standards
References
[edit]- ^ Paul Cook (2002). Commentary on IEE Wiring Regulations 16th Edition, BS 7671 : 2001: Requirements for Electrical Installations Including Amendment No. 1 : 2002. IET. p. 2. ISBN 978-0-85296-237-4.
- ^ Hermann J. Koch (2017). Practical Guide to International Standardization for Electrical Engineers: Impact on Smart Grid and e-Mobility Markets. Wiley. p. 90. ISBN 978-1-119-06743-6.
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai aj ak al am an ao ap aq ar as at au av aw ax ay az ba bb bc bd be bf bg bh bi bj bk bl bm bn bo bp bq br bs bt bu bv bw bx by bz ca cb cc cd ce cf cg ch ci cj ck cl cm cn co cp cq cr cs ct cu cv cw cx cy cz da db dc dd de df dg dh di dj dk dl dm dn do dp dq dr ds dt du dv dw dx dy dz ea eb ec ed ee ef eg eh ei ej ek el em en eo ep eq er es et eu ev ew ex ey ez fa fb fc fd fe ff fg fh European Commission, Personal protective equipment, Regulation (EU) 2016/425, Summary list as xls file, accessed 12 July 2025
- ^ BSI, BS EN 1325-1:1997 - Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis, accessed 29 November 2020
- ^ Bringas, John E. (2004), Handbook of Comparative World Steel Standards: Third Edition (PDF) (3rd. ed.), ASTM International, p. 18, ISBN 0-8031-3362-6
- ^ BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019, accessed 23 November 2020
- ^ "BS EN 13204:2004 - Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements – BSI British Standards". Retrieved 2011-11-12.
- ^ European Commission, Coronavirus: European standards for medical supplies made freely available to facilitate increase of production, accessed 12 July 2025
- ^ Engineering 360, DS/EN 45011: General requirements for bodies operating product certification systems, accessed 29 November 2022
External links
[edit]
Wikimedia Commons has media related to EN standards.